BBGFC.com

How To Spool a Braided Line

Because of the numerous advantages that braided line provides over its less complicated counterparts, many anglers prefer to use it over its less complicated counterparts. However, there is more to it than meets the eye, and a number of specific requirements must be met in order to ensure that the process is successfully completed in its entirety.

According to fishermen, mono lines have a number of advantages over braided line. These include high strength, minimal stretch, resistance to abrasion, and a lack of line memory, among other characteristics.

If you tie your line in knots, the most unpleasant thing that could happen is that you won’t have any more options for fishing. To avoid this, we can only recommend that you carefully read the instructions in our guide to ensure that you will be successful.

If you’re interested in fishing and want to learn everything you can about how to improve your skills and enjoy your hobby, you should definitely read some of the other related articles we’ve published on our websites, such as the ones on how to purchase a dependable saltwater spinning combo or an excellent surf casting rod and reel combo.

 

Spooling correctly

When spooling a spinning reel, the first thing you should watch out for is tying wind knots on the spool.

The manufacturers of spinning reels intended for use with braided line are well aware of the significance of this aspect, and as a result, many models are designed with a rotor and line that spool evenly from top to bottom with a braid of a specific diameter.

All that is required to complete this process correctly is that you avoid using a line diameter that is different from that recommended and that you do not spool the line in the incorrect direction.

 

Regular issues (and solutions)

On the market today, the vast majority of spinning reels have been specifically designed to be used in conjunction with braided or nylon fishing lines. Nylon is thicker than braid, resulting in a design compromise in which the line lay is not properly adjusted to either of the two options, resulting in a line that is not suitable for either of them.

However, some manufacturers have recognized that this is becoming a problem, particularly if the reel is spooled straight out of the box, and they have devised a solution in the form of a package of spool washers that allow the angler to fine tune the line lay to his or her preference.

 

The spool washer

The addition of a thin spool washer to the shaft would be a simple solution to this problem. The correct size will be determined through a process of trial and error, but the end result should be quite satisfactory.

If you begin by putting in large washers, you will have a much harder time determining whether or not your intervention is effective because the changes you have made will be more visible.

Begin by adding thin arbor shims and work your way up from there. Any necessary adjustments will become apparent as the journey progresses, so be prepared.

The fact that not every uneven line lay is a mistake should not be understated. Some reels are specifically designed to have a line that is slightly tapered towards the top or bottom, but you should have been aware of this when you purchased the reels in the first place.

 

The types of unbalanced line lay

Unbalanced lay can be classified into three types, all of which are common. One example is the situation in which the top of the spool holds more line than the bottom of the reel. This is followed by the reversed example, and the final example would be an unbalanced lay across the entire reel length.

The latter indicates that the drag washer is worn out and that you must replace the washer set as a whole, whereas the two cases previously discussed can be resolved by making minor adjustments to the washer set.

 

Tips and tricks

If you want to make certain that you don’t run into any difficulties along the way, one thing you should keep in mind is that you should have a few tricks up your sleeve to fall back on.

Because braided line is much tougher than other alternatives, and it cannot be cut with a nail clipper, it is a good idea to keep a sharp pair of scissors on hand when working with it.

Another thing we recommend is that you avoid twisting braided line around your finger or hand because the line is so strong that it can cause deep cuts and result in an unfortunate accident, which will ruin your fishing trip.