All DIY enthusiasts understand that investing in a drill press is a highly practical option – you can see our variety of drill presses by clicking here. Anything from a bookstand to a pencil holder, as well as charm bracelets and even glider chairs, can be made with this type of gadget.
We have a treat in store for you if you enjoy doing your own home repair projects. For those of you who have a drill press and are looking for new projects to try out, we’ve put up a list of suggestions for you below.
The advantages of a drill press
Drill presses are becoming increasingly popular among do-it-yourselfers. These gadgets are available in a variety of sizes and styles, and they are both reasonably priced and functional. This feature is really useful when it comes to finishing various projects, as it allows you to drill at precise angles with less effort.
Drilling holes into plastic, wood, and even metal may be accomplished with little to no effort if you use a drill press. Moreover, aside from being precise, these machines are also powerful, and they can spare you from having to perform a significant amount of manual labor.
Given that most manufacturers are cognizant of the fact that customers utilize these devices for home improvement tasks, many of the devices now on the market are extremely safe.
Make a bookstand
If you are a bookworm, or if you have a friend or family member who is a bookworm, you can spend your spare time building a bookstand that is both functional and visually appealing. Because the majority of bookstands have hinges, you may use your new drill press to safely and conveniently drill the holes that will be required.
As you are probably aware, a bookstand that does not have perfectly aligned hinges is unable to be used. It is therefore essential that you carefully measure the wood that you intend to use before beginning the drilling process in order to avoid this situation.
You can choose from a variety of bookstand designs when it comes to their appearance. If you are a rookie, we recommend that you start with a straightforward option. Once you’ve mastered the art of utilizing your drill press with pinpoint accuracy, you may go to more sophisticated designs that demand more time and skill to complete.
Make a knick-knack shelf
A knick-knack shelf is all you need if you appreciate the concept of being able to exhibit your trophies or other pieces of memorabilia that you hold dearly. The best thing you can do before starting your project is to look for designs online and pick one that you like.
You don’t need a lot of materials to construct a shelf with a traditional appearance. For example, you may start with two 6′′ x 36′′ x 3/4′′ pieces of wood and a 2′′ x 36′′ x 3/4′′ piece of wood. After that, go to your local hardware store and purchase some carpenters glue as well as some bar or C-clamps.
Once you’ve gathered all of your materials, you’ll need to cut each piece of wood in half. If you do not have the necessary tools to complete this task at home, you can ask the shop assistant to assist you, since most wood-selling establishments are equipped with the appropriate instruments to complete the task for you.
After that, glue the 2′′ X 18′′ piece of wood vertically to a 6′′ X 18′′ piece of wood. For the time being, you can use a clamp to hold the pieces together while the glue sets. After that, attach the remaining pieces of wood.
Final step is to use the drilling press to drill the holes that will be required to install the shelf to the wall. If you wish to paint the shelf a specific color, now is the time to do it. After the paint has dried completely, you may attach your new knick-knack shelf to the wall with screws.
A rustic pot rack
In the event that you do not have enough counter space in your kitchen to accommodate all of the pans you own, you might want to consider building a new rack for them. You’ll be able to hang them on a wall that’s available to you in this manner. Consider the space that you have available before selecting one of the many woodworking plans that are accessible online. This will ensure that the finished rack will fit in your available area.
To complete this project, you’ll need to use your valued drilling press to drill holes of varying sizes and depths in numerous locations. However, as long as you follow the directions to the letter, this should not be a problem.
It is also rather simple to construct charm bracelets. To complete this project, you will need several coins as well as a bracelet chain with a toggle clasp. Start by washing the coins with soap and warm water to ensure that they are as clean as possible. For exceptionally dirty hands, you can scrub them with a toothbrush to get rid of the dirt.
After the coins have dried, it’s time to decide how you’ll put each one of them to good use. After that, make holes in the coins with a drill. It is important to insert the hole near the top of each coin in order to avoid having difficulty attaching them to the chain. After that, it’s time to join the coins to the chain in the order that you want them to appear.
It is now necessary to check that the bracelet is properly fitted to your wrist. If this is not the case, you may want to consider eliminating some of the connections from your website. This technique can be used to create different types of jewelry, such as earrings and necklaces, using the same materials.
A desk organizer made of wood
If you are the type of person who appreciates keeping their belongings in order, a desk organizer is all that you require. The following tools and materials are required to construct one from scratch: a precut 9 by 3 1/2 by 1 inch piece of wood, a ruler and drill press, a metal clamp, an awl, paint, and a piece of wood that has been precut to 9 by 3 1/2 by 1 inch. You can also purchase four 1-inch rubber feet to go with your purchase.
Before you begin drilling, sketch out a design with a pencil and ruler on a piece of paper. Then, using an x, mark the locations where you intend to drill through the wooden board. A deep depression should be made in the middle of each of the areas designated with an x with the help of an awl.
Then, using a drill press, drill the holes that need to be made. Every time you drill a hole, be certain that the gadget is properly aligned with the hole. Make use of the metal clamp to hold the piece of wood in place. If you decide to incorporate rubber feet into the design of the organizer, you may also drill small holes to accommodate them in the future.
The organizer should be painted when you have finished drilling the holes in the wood. If you want the natural design of the wood, you can use natural finish Danish oil instead of colored paint if you prefer the look of the wood. Once you’ve finished painting, you’ll need to let the organizer dry for around 24 hours before using it. The use of rubber gloves is strongly recommended in order to avoid getting paint or oil on your hands throughout the painting process.
All that remains is to connect the rubber feet to the caddy and to fill it with your office essentials once it has dried completely.
A pencil holder
You could also make a pencil holder out of a small slice of wood that was cut from the base of a tree or a branch, which would be an interesting project to undertake. Its circumference should be around six inches in diameter. In addition, you will require a hand saw, a 7/16′′ drill bit, and sandpaper. It is optional to use Danish oil or paint.
To begin, use the saw to cut the piece of wood to the desired height by adjusting the blade speed. Then, using a drill press, drill holes into the top of the wood to hold the screws. Drilling might be done in a pattern or completely at random. If you settle on a pattern, mark the locations of the drill holes using a pencil before you begin drilling. This will come in good at some point.
After that, sandpaper should be used to smooth down the edges of the pencil holder. You can now paint it with ordinary paint or Danish oil, depending on your preference. Depending on your preference, you should leave it to cure for around 24 hours before inserting the pencils into the hole.
Other projects you could try
A gliding chair, a clay pot hanger, and louvers can all be made with a drill press if you are an experienced hobbyist carpenter who is confident enough to tackle more intricate projects.
You may discover helpful instructions on how to make these objects online because there are numerous websites dedicated to DIY enthusiasts such as yourself that provide such information. However, before you attempt any of them, remember to exercise caution and wear protective clothing.
Charles Reynolds is an engineer from New York University with a passion for fishing. His earliest memories of fishing go back to the days spent on the lake with his grandfather who taught him the sport. Reynolds spends a large part of his holidays fishing with his son and passing on the skills to the little one.