How To Spool A Braided Line (Fishing & Hunting)

Numerous anglers prefer to utilize braided line over its less sophisticated competitors due to the numerous advantages it provides over other types of fishing line. To be sure, several particular conditions must be satisfied in order for the procedure to be performed effectively. There is, however, more to it than meets the eye.

A number of advantages exist when comparing mono line to braided line, including great strength, little stretch and resistance to abrasion, as well as lack of line memory, at least in the opinion of many anglers.

The most inconvenient thing that may happen is that you could tie your line in knots, rendering it useless. We can only recommend that you thoroughly read the steps in our guide to ensure that you are successful.

If you’re interested in fishing and want to learn everything you can about how to improve your skills and enjoy your hobby, you should definitely read some of the other related articles we’ve published on our websites, such as the ones on how to choose a dependable saltwater spinning combo or how to choose a top-notch surf casting rod and reel.

Spooling correctly

When spooling a spinning reel, the first thing you should watch out for is tying wind knots on the spool.

The designers of spinning reels meant for use with braided line are well aware of the significance of this element, and as a result, many models are designed with a rotor and line that spool uniformly from top to bottom with a braid of a specific diameter.

All that is required to finish this operation successfully is that you avoid using a line diameter that is different from that advised and that you do not spool the line in the incorrect direction.

Regular issues (and solutions)

On the market today, the vast majority of spinning reels have been specifically developed to be used in conjunction with braided or nylon fishing lines. Nylon is thicker than braid, resulting in a design compromise in which the line lay is not properly adjusted to either of the two possibilities, resulting in a line that is not ideal for either of them.

However, some manufacturers have recognized that this is becoming a problem, particularly if the reel is spooled right out of the box, and they have devised a remedy in the form of a set of spool washers that allow the angler to fine tune the line lay to his or her preference.

The spool washer

The addition of a thin spool washer to the shaft would be a simple remedy to this problem. The proper size will be determined through a process of trial and error, but the end product should be rather nice.

You should avoid starting with massive washers since you will be much less likely to discover whether or not your intervention is effective if the changes you make are immediately obvious.

Begin by adding thin arbor shims and work your way up from there. Any necessary alterations will become apparent as the journey progresses, so be prepared.

Note that not every uneven line lay is a blunder; it is crucial to understand the difference. Some reels are especially built to have a line that is slightly tapered towards the top or bottom, but you should have been aware of this when you purchased the reels in the first place.

The types of unbalanced line lay

Unbalanced lay can be classified into three forms, all of which are common. One example is the situation in which the top of the spool retains more line than the bottom of the reel. This is followed by the reversed example, and the final example would be an unbalanced lay throughout the entire reel length.

The latter indicates that the drag washer is worn out and that you must replace the washer set as a whole, whereas the two examples previously discussed can be resolved by making minor adjustments to the washer set.

Tips and tricks

One thing to bear in mind if you want to ensure that you don’t run into any troubles along the way is to be prepared with a few tricks up your sleeve before you leave home.

Because braided line is much tougher than other alternatives, and because it cannot be cut with a nail clipper, it is a good idea to keep a sharp pair of scissors on hand.

Another thing we recommend is that you avoid twisting braided line around your finger or hand since the line is so strong that it can inflict deep cuts and result in an unfortunate accident, which will ruin your fishing excursion.

Related Posts