BBGFC.com

How To Fish For Fluke (Just for Fishing)

How To Fish For Fluke (Just for Fishing)

A reliable approach for catching more bass is to use flukes, and this is the method to choose. These soft plastic baits, which are meant to look like shads and are guaranteed to work for capturing bass, are available for purchase. The term fluke is also used to refer to a specific type of fish, which we shall discuss in more detail later in this chapter. For the time being, let’s concentrate on how to fish flukes for bass and the measures that must be taken in order to have a successful fishing excursion.

A bit about flukes

Flukes, as previously mentioned in the introduction, are plastic baits that can be used to catch bass, specifically. They are jerk baits, which means that they will disturb the surface of the water and cause a small amount of commotion in order to attract the attention of the fish lurking beneath the surface.

They are available in a huge number of colors, but this does not imply that you need be very concerned with whatever color you choose. This factor has little to no bearing on your chances of catching bass, so don’t spend too much time worrying about it.

Although we mentioned bass, the truth is that these baits are fairly adaptable, which means that you can use them to catch both large and small types of fish with relative ease and success. Another important point to mention is that you may use them to capture fish in any weather conditions, and they are not restricted to specific seasons.

What rod and feel should you use with flukes?

While flukes are quite adaptable, you must pay close attention to the rig you want to employ with them. An underwater spinning rod and reel would be the most appropriate choice because it allows you to skip the fluke and cast further into the dense underwater brush, thereby enticing fish hiding in the brush to come forward.

When it comes to selecting the proper rod lengths, there are no hard and fast rules to follow. Most experts advise choosing a rod length that is most comfortable for you. Many fishers choose a rod that is responsive while also being sturdy and durable. If you wish to capture a certain species of fish, this factor is important to consider. Bass is a powerful fish that is capable of putting up a good fight, so use a powerful combination to avoid losing the fish.

What kind of hook should you pick?

Again, when it comes to bass fishing, we must concentrate on obtaining a powerful hook. When the fish bites, the sheer force of the bite should prevent the hook from straightening and breaking free. Round bend hooks are your best option since they provide tremendous leverage and are particularly effective for hooking large, aggressive fish that fight a lot when hooked.

Why you must straighten your flukes

The most important thing to remember when learning how to fish flukes is that your baits should be straightened. This is true whether you want to catch bass or any other similar fish. The responsibility for this type of job will rest on your shoulders because vendors typically give flukes that have not been straightened. They will not provide adequate tracking, and their movements in the water will not appear natural to bass or other fish, which is an issue with these flukes.

Having said that, you will be responsible for straightening the flukes yourself. Here’s how to accomplish it in a short amount of time. For around 20 minutes, submerge the flukes in boiling water to kill the bacteria. If you’re using larger baits, you’ll want to soak them a little longer. Make certain, however, that the flukes do not grow overly soft if they are placed in boiling water for an extended period of time.

Using your palms, straighten the baits after they have been soaked for an extended period of time. You can use them as bait for fish as soon as they have been thoroughly dried and cured.

The necessary steps for rigging a fluke properly

In order to be successful when using flukes to capture bass, you must take the required precautions and follow the right rigging procedures. In your left hand, hold a fluke and a hook in your right hand. While doing so, be sure that the fluke is kept erect with one hand. The hook must be inserted through the mouth of the bait, dead center in the mouth of the bait.

The hook must next be inserted into the underbelly while maintaining the alignment of the fluke. If you follow these instructions, you should be able to achieve perfect balance. This is one way that can be used. Alternatively, hold the fluke with its back to the hook and thread the hook through it. Because of this, the behavior of the bait will vary depending on how you rig the fluke, as you can easily guess.

Continue to allow it to drop until it reaches the desired depth of water without using the fluke. It is beneficial to twist the bait a little. After a few moments, it will begin its jerky moving pattern, which you can let it to perform while keeping an eye on the line. When a bass takes a bite out of the bait, you will know it.

How does hooking influence the movement?

The ways for hooking your bait that we discussed earlier are as follows: Take a look at the bait now to see how this effects its movement. In the first way, the hook is inserted into the underbelly of the fish, causing the bait to appear to rise upward as a result of the uneven jerky motions created. If you are interested in tracking the movement of your bait, this configuration will serve you quite well.

It is possible to make the fluke appear to be diving by using a different manner of hooking. In either case, the fish swimming below will be attracted to your technique. The addition of additional weights will allow your fluke to sink even farther if you like. This can be accomplished by inserting lead nails into the fluke’s body. There is also the option of using a bell sinker, which should be rather simple to implement.

In relation to the movement of the bait, the type of rod you employ is important. In the case of a heavy rod with a quick action, the fluke will make brief, jerky movements, as an example. Make careful to use a swivel if you want to keep your line from twirling around. You will even be able to add some weight to the rig, which will allow you to have better control over the rig as a result.

An other method to personalize your rig for more unusual bait movements is to use a loop knot. You will be able to detect fish strikes with more accuracy as a result of this setting, which is a significant benefit.

Where should you take your fluke tackle configuration if you want to catch a lot of fish?

Here are some suggestions for where to cast your line for the most effective and gratifying fishing experiences now that your setup is ready to go fishing. If you’re working on shallow grass beds, this style of equipment is perfect for you!

As long as it feels safe in the high brush, bass is one of those fish species that prefers to spend its time near to the shoreline. It may be worthwhile to forego your fluke in these waters, as you may be able to attract the fish out of hiding as a result.

The area around boat docks is another ideal spot for skipping a fluke. The space between two boats can be an excellent location for this type of activity. There are also some excellent options on either side. Because you will most likely not be able to view your lure properly from where you will be standing, one thing you should pay attention to is the movement of the line.

In order to catch the fish you desire, there are a variety of factors that must be considered, and using an appropriate lure is only one of them. There are a variety of factors that influence whether or not you catch a giant bass with flukes, including water temperature, clarity, and currents. If you don’t catch a large bass when using flukes, it is possible that it is not your fault.

About flukes as a fish species

Now that we’ve discussed the fluke lures and how to catch them, let’s have a look at how to fish for fluke with success. This is a marine flatfish that may be found primarily along the east coasts of Canada and the United States of America. The occasional large fish, weighing more than 10 pounds, may be caught, but this should not be expected to be the norm.

If you are interested in the fluke fishing season, it begins in April when the water temperature begins to increase steadily over a period of time. These fish prefer warm water, which is why you have a better chance of catching some of them during the summer months. Nevertheless, if you ask any seasoned angler who has ever caught one of these fish, they will tell you that the beginning of May is the most fruitful time of year for catching flukes.

The fishing season is open throughout the summer, and if you go fishing by the end of September, you may even be able to catch something. The greatest sites to look for flukes are in shallow water, where schools of flukes tend to congregate in huge numbers, providing you with the ideal opportunity to catch a sufficient quantity of fish.

The fact that flukes tend to retire to deeper water as the weather gets hotter should be kept in mind when looking for them. If you’re planning a deep sea fishing vacation, you might even want to go on a little expedition to make the most of your time. Because there are so many anglers who are serious about capturing this species, there are lots of boats available to transport you there.

Methods to catch flukes

Flukes are notoriously difficult to catch in shallow water because they prefer to burrow in the mud or sand to avoid being discovered. They do this because one of the methods they employ to catch their prey is to lie in wait while their eyes are turned toward the tide. While this may make them difficult to detect, it is also one of their greatest weaknesses. In order to accomplish this, they swarm around any thing they can find on the waterbed.

That means that your fish detector will be able to detect any irregularities in the bottom and point you in the direction of the areas where flukes are most likely to be gathering in high numbers. Then, once you’ve discovered a structure where you think flukes might be hiding, use a drift anchor to lock your position and spend some time floating over it. This will increase your chances of achieving achievement.

Many fishermen believe that a light jig is the most effective tackle for capturing flukes, and this is supported by research. This must make it all the way to the bottom without touching it. That will provide you with the essential advantage in order to bring the flukes out of hiding.

If you’re curious what kind of bait these fish prefer, you can figure it out by studying the fish you capture and noting which one they prefer. When you bring a fluke to the surface, the fish will expel the contents of its stomach; the leftovers of the fish’s last meal will reveal everything you need to know about the fish’s favored diet, and you may rely on these discoveries to catch additional fluke in the future.

Using fluke fishing nets when removing the fish from the water is recommended if you want to inflict the least amount of stress possible to the fish. When doing this procedure, there are certain stages that must be followed to ensure success.

The fluke should always be guided with the head first while bringing the fish out of the water. If the fish is not within striking distance, do not flash the net. One of the primary reasons for netting the fish is to avoid the natural struggle that occurs after the fluke knows it has been lifted from the water.

It might be a good idea to have more than one net on your boat just in case. It is possible that your friends can assist you by bringing their nets closer together, which will prevent the fish from fleeing and therefore saving you time. When using fishing nets, be careful not to waste your time and energy on specimens that you do not intend to keep. There are a few things that can go wrong, and if your net gets stuck in the rig, you run the danger of ruining your trip completely.

Simply storing your net somewhere where you will have easy access to it is a good practice to follow. You never know when a fish may strike, so if you don’t have a net handy, you may miss out on the opportunity to pull up a specimen that is worth photographing while you are out fishing.

At first, the fluke will not be aware that it has been hooked, and it will not resist. Make certain that the net is placed beneath it, and allow the fish to calm down. This will give you enough time to get a hold of the fishing net you’ve been eyeing. Lift it as quickly as possible to ensure that the fish experiences the least amount of strain.

One interesting fact about flukes that you might not have known is that they can swim backward. It’s important to keep this in mind while you adjust the net to remove the fish from the water.

How To Fish For Fluke

If you are looking for a dependable method to catch more bass, using flukes is the way to go. These baits, made from soft plastic, are designed to resemble shads, and they are guaranteed to work for catching bass. The name fluke also applies to a certain fish species, and we will treat that topic separately a bit later. For now, let’s focus on how to fish flukes for bass and what steps you need to undertake a successful fishing adventure.

 

 

A bit about flukes

As mentioned in the introductory paragraph, flukes are plastic baits you can use, specifically for catching bass. They are jerk baits, which means that they will disturb the water surface and will create a little bit of ruckus to draw the attention of the fish lurking below.

 

They come in a large variety of colors, but this doesn’t mean that you should fret too much about what color to pick. This aspect has little to no impact on how lucky you will be while catching bass, so don’t waste too much time on it.

 

We mentioned bass, but the truth is that these baits are quite versatile and that means that you can use them for catching both large and small species of fish. An additional aspect that must be mentioned is that you can use them to catch fish in any weather, and they are not season based.

 

 

What rod and feel should you use with flukes?

While flukes are versatile, you must pay a little attention to the rig you are going to use. A spinning rod and reel would be the wisest choice, because it allows you to skip the fluke so that it reaches further into the thick brush that grows underwater, thus convincing fish hiding there to come forward.

 

When it comes to picking the right rod lengths, there are no set in stone rules. The best recommendation would be to go for the rod length that feels the most comfortable for you. Many anglers prefer a rod that is both sensitive and strong. Depending on the kind of fish you want to catch, this aspect matters. Bass is a strong fish and can put up a fight, so go for a strong combination, to avoid losing the fish.

 

 

 

What kind of hook should you pick?

Again, if we talk about bass, we need to focus on getting a strong hook. When the fish bites, its sheer force should not be able to straighten the hook and break free. Round bend hooks are your best choice, because they offer excellent leverage, and are also successful for catching strong fish that fights a lot.

 

 

 

Why you must straighten your flukes

When learning how to fish flukes, whether you want to catch bass or any other similar fish, you must make sure that your baits are straightened. Because sellers usually offer flukes that are not already straightened, this type of work will fall on your shoulders. The problem with these flukes is that they will not provide good tracking, and their movements in the water will not seem natural to bass or other fish.

 

That being said, you will have to straighten the flukes yourself. Here is how you can do that, fast and easy. Use hot water to immerse the flukes for about 20 minutes. If you have larger baits, let them soak for a little longer. However, make sure that the flukes don’t become too soft, if left in hot water for too much time.

 

After soaking time is over, place the baits on a dry towel, and straighten them with your palms. The moment they are properly dried, you can use them for baiting fish.

 

 

 

The necessary steps for rigging a fluke properly

If you want to be successful when using flukes for catching bass, you must follow the necessary steps to rig it properly. Take one fluke in one hand and the hook in the other. Make sure that the fluke is held upright while doing so. The hook must go through the mouth of the bait, right dead in the center.

 

The hook must then slide into the underbelly while keeping the fluke aligned. You should be able to achieve perfect balance if you do so. This is one method to use. The other is to hold the fluke with its back to the hook and pass the hook through there. As you may easily imagine, the bait will behave differently depending on how you rig the fluke.

 

After that, skip the fluke and allow it to sink to the depth of water you want. Twitching the bait a little helps. It will start doing its jerky movement routine, and you can let it do so while keeping an eye on the line. That will tell you when a bass bites into the bait.

 

 

 

How does hooking influence the movement?

We described earlier a few methods for hooking your bait. Now let’s see how this influences the way the bait will move. The first method mentioned involves taking the hook through the underbelly; that makes uneven jerky movements, and the bait will seem to move upward. If you are interested in monitoring the way your bait moves, you will do well with this configuration.

 

The other hooking method will make the fluke look like it dives. Either technique will attract the attention of the fish swimming below. In case you want your fluke to sink even further, you will need to add some extra weights. You can do so, by sticking lead nails into the body of the fluke. Of course, another method that should be easy to apply is to add a bell sinker.

 

The type of rod you use has an impact on how the bait will move. For instance, if you use a heavy rod with fast action, the fluke will make short, jerky moves. If you want to prevent your line from twisting, make sure you use a swivel. This way, you will even manage to add some weight to the rig, for better control.

 

A loop knot is another way to customize your rig for more peculiar bait moves. An important benefit of this configuration is that you will be able to detect when fish strikes with superior accuracy.

 

 

 

Where to take your fluke tackle configuration to catch a lot of fish

Now that your rig is prepared, and you are ready to go fishing, here are some ideas on where to cast your line for efficient and rewarding experiences. This type of rig works, for instance, on shallow grass beds.

 

Bass is one of those fish species that likes spending time close to the shore as long as it feels protected in the high brush. Skipping your fluke in these waters can be a good investment, and you will manage to draw the fish out of hiding.

 

Another good place for skipping a fluke is around boat docks. The opening between two boats can be ideal for doing so. The sides are a good option, too. One thing you should focus on is the movement of the line because the chances are that you will not be able to see your lure well from where you will be standing.

 

Many aspects have an impact on your success to catch the fish you want, and having the right type of lure is just one part of what you can do. The water temperature, how muddy or clear it is, the currents, all have a role to play, so, if you don’t catch a large bass using flukes, it may not be the fault of the lure you picked.

 

 

 

About flukes as a fish species

Now that we talked about the lures that carry this name let’s see how to fish for fluke with successful results. This is a marine flatfish, and you can find it mostly along the East Coast of Canada and the US. Large specimens, weighing more than 10 pounds, can be caught on a good day, but do not expect this to be the norm.

 

If you are interested in the fluke fishing season, that begins in April, as the water temperature starts to rise consistently. These fish like warm waters and that is why in summer, you have more chances to catch some of them. However, if you ask any seasoned angler who has ever pulled such fish out of the water, they will swear by the beginning of May as being the most lucrative time for catching flukes.

 

The fishing season extends throughout the summer, and you can even hope to catch something if you go fishing by the end of September. The best places where you can find flukes are the shallow waters where schools of flukes tend to flock in large numbers, offering you the perfect opportunity to get enough fish.

 

One thing to bear in mind is that flukes tend to retreat to deeper sea as the weather becomes hotter. You may even want to engage in a bit of an expedition if you plan some deep sea fishing adventure. Luckily, there are plenty of boats ready to take you there, as many anglers are passionate about catching this fish.

 

 

 

 

Methods to catch flukes

Flukes are sometimes difficult to catch because they like to bury in the mud or sand in shallow waters. They do this because one method they use to catch their prey is by lying in waiting as their eyes face the tide. While this might make them difficult to spot, it is also their downfall. To do this, they crowd any object they can find on the waterbed.

 

That means that your fish finder can pick any irregularities of the bottom and show you where there are most likely chances for flukes to be gathered in large numbers. Once you find a structure where flukes may be located, use a drift anchor to secure your location and spend some time over it. This will enhance your chances of success.

 

As far as the most efficient tackle for catching flukes is concerned, many anglers prefer a light jig. This must reach the bottom, without touching it. That will give you the necessary edge to make the flukes come out of hiding.

 

If you are wondering what these fish prefer as bait, you can identify the perfect one by observing the fish you catch. When you bring a fluke to the surface, the fish will eliminate the contents of its stomach; the remnants of the last meal will tell you all about the preferred diet of the fish, and you can count on these findings to catch more.

 

If you intend to cause as little stress as possible to the fish, use fluke fishing nets when you bring them out of the water. There are a few steps you should bear in mind for this operation to be successful.

 

When you bring the fish out, always guide the fluke with the head first. Do not flash the net if the fish is not close enough. The whole point of netting the fish is to avoid the normal struggle that begins once the fluke realizes it is out of the water.

 

A good idea would be to have more than one net on your boat. If the fish struggles a lot, your friends can help you by bringing their nets closer, thus preventing the fish from escaping. When you use fishing nets, make sure that you do not waste your energy on specimens you don’t intend to keep. There are a few things that can go wrong and, if your net gets caught in the rig, you risk to ruin it.

 

A simple tip to follow is to keep your net somewhere you will have easy access to it. You never know when a fish will strike, so, if you don’t have the net at hand, you may lose the chance to bring up a specimen that is worth taking pictures of.

 

At first, the fluke will not know it is hooked, and it will not struggle. Make sure to position the net under it, and let the fish calm down. This will give you the time to get a hold of the fishing net. Lift it quickly, so that the fish struggles as little as possible.

 

One thing you may not know about flukes is that they can swim backward. Remember this while you manipulate the net to get the fish out of the water.